1. Home
  2. /
  3. Suppliers
  4. /
  5. Gentec
  6. /
  7. Gas Regulators

Gas Regulators

R23 Series Pressure Reducing Regulators

R23
R23

GENTEC® R23 series regulators are highly accurate, hand loaded, purge gas and pressure reducing regulators for applications of any non-corrosive, corrosive or toxic gases in low pressure. This series features a high flow rate of Cv=1.7 with a maximum inlet of 500 psig or 1500 psig.

Features

  • Single stage
  • 316L, Hastelloy-C®, Monel® or brass body
  • Metal to metal diaphragm to body seal
  • 500 or 1500 psig inlet pressure
  • High Flow capacity Cv= 1.7

R21 Series Single-Stage Low Flow Regulators

R21
R21

GENTEC® R21 series single-stage in chrome plated brass or stainless steel regulators are designed for pressure control of high purity and corrosive gases in applications where slight fluctuations in outlet pressure are allowable when inlet pressure decreases.These regulators feature metal-to-metal diaphragm seals to prevent gas contamination.

Features

  • Single-stage construction
  • 2” pressure gauges
  • Metal-to-metal diaphragm seals
  • Inlet and outlet ports: 1/4” NPT (F)
  • Minimal wetted surface area for less purging
  • Inlet filter
  • Easy front panel and rear bracket mounting
  • Optional needle valves and diaphragm valves are optional for outlets.
  • Optional relief valve.
  • Weight: 2.0 lbs. (0.90kg)

R22 Series Single-Stage Medium Flow Regulators

R22
R22

GENTEC® R22 series single-stage regulators in chrome plated brass or stainless steel are purge gas, pressure reducing regulators applicable to gas systems for any non-corrosive, corrosive, or toxic gases.
The large valve minimizes fluctuation and also acts as a reliable shut-off feature in low
pressure.

Features

  • Single stage
  • 316L stainless steel or brass body
  • Metal to metal diaphragm to body seal
  • 500, 3000, or 4000 psig inlet pressure
  • Weight : 3.5lbs (1.6kg)
  • Stem: 316L
  • Spring: 316

R11 Series Single-Stage Low Flow Regulators

R11
R11

GENTEC®  R11B series single-stage chrome plated brass regulator and R11SL series single-stage stainless steel regulators are designed for high purity gases in applications where low flow is desired.

Features

  • Single-stage construction
  • 2” pressure gauges
  • Teflon faced neoprene diaphgram seals
  • Inlet and outlet ports: 1/4” NPT(F)
  • Minimum wetted surface area for less pruging
  • Inlet filter
  • Weight: 3.3 lbs. (1.5kg)

 

G190 Series Single-Stage Low Flow Regulators

R12
R12

GENTEC® G190 series single-stage chrome plated brass regulators are designed for general purpose pressure control of non-corrosive gases. With lightweight and compact design, these regulators are most suitable for light duty gas applications.

Features

  • Single-stage construction
  • 1 1/4” diaphragm
  • 2” pressure gauges
  • Inlet and outlet ports: 1/4” NPT(F)
  • Internal safety pressure relief valve
  • Maximum inlet pressure: 3000psig
  • Dimensions: 5in. x 4.7in. x 2.8in.(130mm x 120mm x 70mm)
  • Weight: 1.98 lbs. (0.90kg)

GENTEC R12 Series Single-Stage Low Flow Regulators

R12
R12

GENTEC® R12 series single-stage regulators for industrial specialty gases are designed and manufactured using state-of-the-art technologies and high quality materials. Suitable for laboratory, pharmaceutical, food manufacturing, and chemical applications.

Features

  • Single stage
  • Brass, 303, or 316L body
  • Metal to metal diaphragm seal
  • 1/4” NPT (female) porting for non-inlet and non-outlet connections model
  • 3000, 1500, or 500 psig inlet pressure
  • Various inlet and outlet connections are available (see order information)
  • 2” gauge
  •  Weight: 3.3 lbs. (1.5 kg)

Downloads:

Specialty Gas Equipment (10.38 MB)

Specialty Gas Regulators & Accessories (7.28 MB)

GENTEC® Solutions