Valves

Needle Valves

GENTEC Needle Valves
GENTEC Needle Valves

NV1 Series Needle Valve Features

  • Pressure rating: 5000 psig (345 bar)
  • Suitable for corrosive services, high pressure sampling systems, and shut-down systems.
  • V pattern is the standard stem style. R pattern and K pattern are also available.
  • End connections include GENLOK and NPT types.
  • Tube fitting connections in sizes: 1/8”,1/4”,3/8”,1/2”and 3/4” (3mm, 6mm, 8mm, 10mm and 12mm).
  • Straight pattern is the standard body style. Angle pattern is also available.
  • Knob handle is the standard handle style. Bar pattern is also available.
  • Allow for panel mounting.
  • For oxygen service, please select oxygen cleaning option.
  • Every valve is factory tested at 1000 psig (29 bar) for leakage. Adjust packing nut when working pressure is higher than 1000 psig to prevent leakage.

Check Valves

GENTEC Check Valves
GENTEC Check Valves

Features
GENTEC Check Valves are designed for single directional gas flow control in applications such as chemical processing, pharmaceutical, utilities, oil, and gas.

  • Cracking pressures: 1, 3, 10 & 25 psig
  • Connections: NPT and GENLOK types
  • Back stopper poppet to minimize stress of spring.
  • Tested 100% for cracking & reseal pressure.

Cylinder Valves

GENTEC Cylinder Valves
GENTEC Cylinder Valves

SL-V200 Series Cylinder Valve Features

  • Maximum operating pressure: 3000 psig
  • Operating temperature from -4°F to 158°F (-20°C to 70°C)
  • Unibody design
  • Seat Leak rate: less than 1×10-9 cc/sec He
  • CV: 0.3

Ball Valves

GENTEC Ball Valves
GENTEC Ball Valves

BV1 Series Ball Valve Features

  • Pressure rating:3000 psig (207 bar)- BV15
    2500 psig (172 bar)- BV13/ BV14/ BV16/ BV1
  • Temperature rating: 50°F to 150°F (10°C to 65°C)
  • Bi-directional flow.
  • Encapsulated seat.
  • Directional handle indicating on-off positions.
  • Single-piece ball stem to eliminate backlash.
  • One-piece body to eliminate multiple-seal points.
  • Unique top-loaded capsule packing allows reliable switching.
  • End connections include GENLOK, NPT and FSR types.
  • Connections in sizes: 1/8”, 1/4”, 3/8”, 1/2” and 3/4”.
    3mm, 6mm, 8mm, 10mm and 12mm.
  • Straight pattern is the standard body style. Angle pattern is also available.
  • Allow for panel mounting.
  • For oxygen service, please select oxygen cleaning option.
  • Every valve is factory tested at 1000 psig (29 bar) for leakage. Adjust packing nut when working pressure is higher than 1000 psig to prevent leakage.

Diaphragm Valves

GENTEC Diaphragm Valves
GENTEC Diaphragm Valves

DV8 Series Diaphragm Valve Features

  • 316L Stainless Steel enhances welding and
  • corrosion resistance
  • Face seal fittings (FSR), compression tube fitting
  • Design for very low particle generation
  • Metal-to-metal diaphragm seals
  • High cycle life
  • 100% Helium leak tested

GENTEC® Solutions